Hard drives – Hard drives are a touch more Tweet Board complex. First off, you have to recognise what you want to do with the hard drive. By this, I imply both you want it set to both SLAVE or MASTER. If you need besides from the hard force (load windows or something different OS off it) then you definitely need it to be your grasp. If you already have a grasp, and you want to apply this as more space, set this hdd to slave. This placing exchange requires a jumper on the again of the hard pressure to be moved. It may also sound hard, however it is smooth. These jumper configurations may be discovered on the returned of the hdd; most have a small label which states which manner is which. After placing the jumper, take the IDE cable that runs to your primary tough pressure. This is the lengthy, commonly grey cable that runs from a slot in your motherboard to your number one tough drive. If you’re placing your new hdd in as a slave, this cable should have a 2nd connector on it no longer getting used. Connect this to the brand new slave hard power, but do not disconnect the cable out of your other HDD.
If you are placing a new power in as grasp, then you want to take the cable strolling proper to your antique HDD, detach it, and join it to the brand new grasp HDD. In both cases, you may need to attach a power cable to the HDD. This runs from your strength supply, and you ought to have a few extra not being used. Connect one connector to the 4 pronged connector on the tough power.
Once the tough drive is all related, make sure it’s miles fixed to the chasis on each aspects of the case. This may be performed via doing away with the case, then bolting the tough power on one aspect after which the opposite. This is crucial – in case you only bolt one aspect of the HDD, it is able to cause corruption of files at the HDD.